Panasonic proiector beamer pt fw300nte Manual

Manuale PDF
66 Pagini Română

Panasonic proiector beamer pt fw300nte
ENGLISH - 50
Maintenance
Care and Replacement
J Before cleaning the projector
Switch off the MAIN POWER and disconnect the mains plug from the mains socket.
Unplug all the cables from the projector.
J Cleaning the outer surface of the projector
Wipe off dirt and dust gently with a soft cloth.
If it is difficult to remove the dirt, soak a cloth with water, wring the cloth well and then wipe the projector.
Dry off the projector with dry cloth.
If you use a chemical treated wipe, follow the instructions supplied with it.
J Cleaning the lens and front glass surface
Wipe off dirt and dust gently with a lint-free cloth.
Make sure no dirt or dust remains on the surface of the lens. It will be enlarged and projected onto a
screen.
J Before replacing the Lamp unit
Switch off the MAIN POWER and disconnect the mains plug from the mains socket.
Wait for more than 1 hour and make sure the lamp unit and the surroundings are cooled enough.
Prepare a Phillips-head screwdriver.
Contact an Authorised Service Centre to purchase a replacement lamp unit (ET-LAF100).
When the projector is mounted on the ceiling, do not work directly under the projector or put your face
closer to the projector.
J When to replace the lamp unit
The lamp unit is consumable and the brightness decreases by duration of usage. The LAMP indicator will
inform you of the replacement timing at 5 000 hours, and at 6 000 hours, the projector will be turned off. Those
figures are rough guidance and might be shortened by the usage conditions, characteristics of the lamp unit,
environmental conditions, and so on. You can check the duration of usage time using RUNTIME
of STATUS in
the PROJECTOR SETUP menu.
Cleaning the projector
Replacing the Lamp unit
NOTE:
• Prior to replacing the lamp unit, allow it to cool down to prevent the risk of burns, damage and other hazards.
• Do not attempt replacement with an unauthorised lamp unit.
Indication
On screen
LAMP indicator
Over 5 000 hours
“REPLACE LAMP” is displayed on the
upper left of the screen for 10 minutes.
Illuminates red.
Over 6 000 hours
“REPLACE LAMP” is displayed on the
upper left of the screen, and it will stay until
you respond.
To clear the screen, press any button.
NOTE:
• The guide times, 5 000 and 6 000 hours, are rough estimates based on certain conditions and are not a guaranteed time.
• For more information about the lamp unit, such as guaranteed time, see the instructions which is provided with the lamp
unit.
REPLACE LAMP
Cuprins
Extinde tot
Manuale conexe pentru Panasonic proiector beamer pt fw300nte
pt d5500e
Panasonic proiector beamer pt d5500e

Pentru proiector beamer (60 Pagini)
PT-FX400EA
Panasonic proiector beamer PT-FX400EA

Pentru proiector beamer (46 Pagini)
PT-DW17K2
Panasonic proiector beamer PT-DW17K2

Pentru proiector beamer (223 Pagini)
PT-DZ870E
Panasonic proiector beamer PT-DZ870E

Pentru proiector beamer (195 Pagini)
pt ae1000e
Panasonic proiector beamer pt ae1000e

Pentru proiector beamer (16 Pagini)
pt ae4000e
Panasonic proiector beamer pt ae4000e

Pentru proiector beamer (36 Pagini)
PT-V W330U
Panasonic proiector beamer PT-V W330U

Pentru proiector beamer (26 Pagini)
PT-LX26HE
Panasonic proiector beamer PT-LX26HE

Pentru proiector beamer (76 Pagini)
PT-DS12KE
Panasonic proiector beamer PT-DS12KE

Pentru proiector beamer (187 Pagini)
PT-FW430E
Panasonic proiector beamer PT-FW430E

Pentru proiector beamer (87 Pagini)
PT-V W330EA
Panasonic proiector beamer PT-V W330EA

Pentru proiector beamer (82 Pagini)
PT-TW231RE
Panasonic proiector beamer PT-TW231RE

Pentru proiector beamer (79 Pagini)
pt lb80nte
Panasonic proiector beamer pt lb80nte

Pentru proiector beamer (55 Pagini)
PT-RW630
Panasonic proiector beamer PT-RW630

Pentru proiector beamer (185 Pagini)
PT-DZ870U
Panasonic proiector beamer PT-DZ870U

Pentru proiector beamer (190 Pagini)