Panasonic proiector beamer pt fw300nte Manual

Manuale PDF
66 Pagini Română

Panasonic proiector beamer pt fw300nte
ENGLISH - 23
Basic Operation
Switching the projector on/off
J Connecting
1. Make sure the shape of the mains plug and the
AC IN terminal on the back of the projector match,
then push the plug all the way in.
2. Align the side of the power cord secure lock with
the side guide rail of the AC IN terminal of the
projector and slide it in.
3. Place the latch to the latch catcher and press until
it clicks.
4. Connect the mains lead to a mains socket.
J Disconnecting
1. Unplug the mains lead from the mains socket.
2. Depress the latch and slide the cover off.
3. Slide the power cord secure lock up along the side
guide rail and remove.
4. Hold the plug and unplug the mains lead from the
AC IN terminal on the back of the projector.
Power indicator lights in orange if the internal cooling
fan is still operating by internal power supply.
J Direct power on function
You can start the projection with only supplying the
electric power. See “INITIAL START UP” on
page 43.
J Direct power off function
You can switch off the electric power supply any
time by unplugging the mains plug from the mains
socket or by switching off the main power. The
internal lamp cooling fan keeps operating by the
internal power supply, and stops automatically
when cooled enough.
Mains lead
Rail guide
Latch
Latch
Rail guide
NOTE:
Do not use other than the provided mains lead.
Ensure all the input devices are connected and turned off before connecting the mains lead.
Do not force the connector as this may damage the projector and/or the mains lead.
Dirt or dust build-up around plugs may cause fire or electrical hazards.
Switch off the power to the projector when not in use.
If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take
a while to start the projection.
Cuprins
Extinde tot
Manuale conexe pentru Panasonic proiector beamer pt fw300nte