Stopwatch minute hand
1. Press button “A” for 2 seconds to select the
stopwatch hand(s) to be adjusted. The
selection of the hand(s) to be ajusted is
made in the following order by pressing
button “A” for 2 seconds.
* The selected hand(s) turn(s) a full circle.
2. Press button “B” repeatedly to set the
selected stopwatch hand(s) to the “0”
position.
* The hand moves quickly if button “B” is
kept pressed.
3. After all the adjustments are completed,
push the crown back in to the normal
position in accordance with a time signal,
checking that the hour and minute hands
for time display indicate the current time.
■ SETTING THE DATE
1. Pull out the crown to the first click.
2. Turn the crown clockwise until the desired
date appears.
3. Push the crown back in to the normal
position.
Note: Do not set the date between 9:00 p.m.
and 1:00 a.m. Otherwise, the date may
not change properly.
• Before setting the date, be sure to set the
time.
• It is necessary to adjust the date at the end
of February and 30-day months.
Date
B
• The stopwatch can measure up to 12 hours
in 1/20 second increments.
• The measured time is indicated by the four
stopwatch hands that move independently
of the hands for time display.
• When the measurement reaches 12 hours,
the stopwatch automatically stops
counting.
■ STOPWATCH
A:Start / Stop
B: Split/
Split release/
Reset
Stopwatch
1/20-second
hand
Stopwatch
second hand
Stopwatch hour
hand
Stopwatch
minute hand
[ Ex.: 2 hours, 30 minutes and 10.85 seconds ]
NREYM92C
8-2010
CAL. YM92,7T92 (RF8 SERIES)
■ CHARACTERISTICS
1. Time: Indicated by the hour, minute and
small second hands.
2. Date: Displayed in numerals.
3. Stopwatch:
Measures up to 12 hours in
1/20 second increments.
•Split time measurement
■ DISPLAY AND CROWN OPERATION
a. Normal position : Free
b. First click : Date setting
c.Second click : • Time setting
• Adjusting the stopwatch
hand position
Crown
Hour hand
Small
second
hand
■ SETTING THE TIME AND ADJUSTING
THE STOPWATCH HAND POSITION
• This watch is so designed that
1) time setting and
2) stopwatch hand position adjustment
are both made with the crown at the
second click position. Once the crown is
pulled out to the second click, be sure to
make the above adjustments at the same
time.
A
B
a b c
Date
Stopwatch hour hand
Stopwatch
1/20-second hand
Minute hand
Crown
Stopwatch
second hand
Minute hand
Hour hand
1) Time setting
Small
second hand
1. Pull out the crown to the second click when
the small second hand is at the 12 o’clock
position.
* If the stopwatch is measuring or stopped,
it is automatically reset to “0”.
2. Turn the crown to set the hour and minute
hands.
* It is recommended that the hands be set
to the time a few minutes ahead of the
current time, taking into consideration
the time required to adjust the
stopwatch hand position if necessary.
• If the stopwatch hands are not in the “0”
position, follow the procedure below to set
them to the “0” position.
Stopwatch
1/20-second hand
A
B
Stopwatch
second hand
Stopwatch
hour hand
Stopwatch minute
hand
Notes:
1. When setting the hour hand, be sure to
check that AM/PM is correctly set. The
watch is so designed that the date
changes once in 24 hours.
2. When setting the minute hand, first
advance it 4 to 5 minutes ahead of the
desired time and then turn it back to the
exact minute.
2) Stopwatch hand position adjustment
Stopwatch
hour and
minute hands
Stopwatch
1/20-second
hand
→
Stopwatch
second
hand
→
↑
England 
Deutschland 
France 
Italia 
Polska 
United Kingdom 
Россия 
Nederland 
España 
Magyarország 
Sverige 
România 
Portugal 
Colombia 
Suomi 
New Zealand 
Česká republika 
Türkiye 
Danmark 
日本