Manual De Utilizare Seagate Accesorii Pentru Calculator St33000651As [24/42 Pagini]

Seagate accesorii pentru calculator ST33000651AS

24 Barracuda XT SATA Product Manual, Rev. D

Configuring and Mounting the Drive www.seagate.com

For installations which require cables, you can connect the drive as illustrated in Figure 5.

Figure 5 Attaching SATA cabling

Each cable is keyed to ensure correct orientation. Barracuda drives support latching SATA connectors.

3.4 Drive mounting

You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the

bottom-mounting holes. See Figure 6 and Figure 7 for drive mounting dimensions. Follow these important

mounting precautions when mounting the drive:

• Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling.

• Use only 6-32 UNC mounting screws.

• The screws should be inserted no more than 0.150 inch (3.81 mm) into the bottom or side mounting holes.

• Do not overtighten the mounting screws (maximum torque: 6 inch-lb).

Power cable

ignal cable

Signal connector

Power connector