37AHB Series Hydronic Furnace
The optimum in hydronic technology, the newly
designed Rinnai® multi-position hydronic furnaces
offer a unique solution for a wide variety of small- and
medium-sized residential and light commercial
applications. They are compact and ready to fit in tight
spaces which may include, but not limited to, attics,
basements, closets, crawlspaces, and utility rooms.
Intelligent Microprocessor Controller
The 37AHB units are equipped with an intelligent
microprocessor control that allows for domestic hot
water priority and adapts to available hot water flow for
space heating by automatically regulating the pump
and fan sequence to maximize comfort.
Fine Tuned to Work with Rinnai Tankless
Water Heaters
These unique hydronic furnaces are designed to work
in combination with our line of Rinnai® tankless water
heaters to deliver heating capacities that cover a wide
spectrum of residential and light commercial heating
applications. When combined, the units form the Rinnai
Tankless Heating System, the first matched, tankless
hydronic heating solution in the industry!
PATENT PENDING
FEATURES
Specifications
Air Delivery
● Four models covering a range of heating capacities
○ 27,100 to 96,300 BTU/hour
● Multi-position (upflow, downflow, horizontal left,
horizontal right) without modifications *
○ Modifiable for side-entry return air
● Low-flow, high-head pump custom designed to work
with Rinnai's tankless water heaters
● Integrated control board with learning algorithm
● No combustion air infiltration losses when used with
a Rinnai tankless water heater
● Four selectable heat blower off delay times
● Multi-speed motors (ECM)
● Strong 20-gauge steel cabinet
○ Galvanized, painted
○ Fully insulated cabinet
○ Low 34 inch profile
● Multi-position control box
● Designed for serviceability
● Schrader valves to purge air from the system
● Integral filter rack with filter
Fan motor with ECM technology
*
NOTE: The unit is not designed to be installed on its back or
face down.
37AHB Series Hydronic Furnace
† Tested in accordance with ANSI/ASHRAE Standard 37-Latest edition.
‡ Airflows shown are nominal (blower speeds are factory set). For air
delivery other than stated, refer to the Air Delivery & Performance table.
†† Required filter sizes shown are based on the larger of the AHRI (Air
Conditioning & Refrigeration Institute) rated cooling airflow or the heating
airflow velocity of 300 ft/min for throwaway type or 450 ft/min for
high-capacity type.
Side intake filter to be (1) 20”x20”x1” typical for all models.
Air filter pressure drop for non-standard filters must not exceed 0.08 in. wg.
This product is manufactured in a facility registered by UL to ISO 9001.
File No. A6887.
Part of the Rinnai Tankless Heating System
AHB90
AHB75
AHB60
AHB45
600000060 (7/2010)
UL recogniz ed
component
This product is manufactured in a
facility registered by UL to ISO
9001.
37AHB Series Hydronic Furnace
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
TAP 3 (H) 2.0 948 921 891 868 841 819 795 772 701 596 567
TAP 4 (M) 2.0 921 891 864 836 812 788 768 742 699 594 559
TAP 5 (L) 1.5 803 768 740 712 682 652 628 596 569 541 510
TAP 1 (H) 3.0 1343 1318 1296 1270 1248 1225 1197 1168 1109 1025 889
TAP 2 (MH) 2.5 1148 1128 1103 1072 1045 1012 984 955 937 908 690
TAP 4 (ML) 2.0 971 942 911 880 847 817 784 751 715 680 642
TAP 5 (L) 1.5 844 810 777 734 698 665 626 581 533 504 466
TAP 1 (H) 4.0 1700 1666 1635 1604 1576 1543 1518 1492 1465 1430 1402
TAP 2 (MH) 3.5 1561 1524 1490 1456 1428 1396 1364 1330 1230 1265 1224
TAP 3 (ML) 3.0 1391 1350 1320 1281 1245 1209 1190 1131 1090 1064 1031
TAP 4 (L) 2.5 1222 1174 1140 1100 1063 1014 979 937 887 829 777
TAP 1 (H) 5.0
1934 1889 1857 1818 1784 1750 1715 1680 1568 1491 1377
TAP 2 (MH) 4.0
1777 1732 1694 1650 1630 1592 1553 1517 1464 1441 1361
TAP 3 (ML) 3.5
1573 1530 1490 1448 1417 1372 1327 1293 1253 1221 1175
TAP 4 (L) 3.0
1400 1351 1317 1275 1225 1183 1134 1095 1053 1011 951
37AHB090 with
RC98HP, RC80HP,
R94LS, or R75LS
37AHB060 with
RC98HP, RC80HP,
R94LS, R75LS, or
V53i
AIRFLOW (CFM)
NOMINAL AIR DELIVERY CHART (BOTTOM OR SIDE RETURN w/ FILTER)
External Static Pressure (ESP)
UNIT SIZE
ECM SPEED
TAP
SUPPORTS
COOLING
CAP. RANGE
(TONS)
37AHB045 with
RC98HP, RC80HP,
R94LS, R75LS, or
V53i
37AHB075 with
RC98HP, RC80HP,
R94LS, or R75LS
●
C
M
Y
CM
MY
CY
CMY
K
37AHB spec sheet cover (7-2010).ai 7/23/2010 10:16:37 AM37AHB spec sheet cover (7-2010).ai 7/23/2010 10:16:37 AM
England 
Deutschland 
France 
Italia 
Polska 
United Kingdom 
Россия 
Nederland 
España 
Magyarország 
Sverige 
România 
Portugal 
Colombia 
Suomi 
New Zealand 
Česká republika 
Türkiye 
Danmark 
日本