Fujitsu a văzut MHV2100BH Manual

Manuale PDF
274 Pagini Română

Fujitsu a văzut MHV2100BH
5.3 Host Commands
C141-E224 5-105
*3) Serial ATA Functions
The host can enable and disable the following Serial ATA functions by issuing
this command after setting X'10/90' in the Features field and an applicable value
in the Sector Count field:
Serial ATA function Sector Count field
Non-zero buffer offset in DMA Setup FIS 01h (*1)
DMA Setup FIS Auto-Activate optimization 02h (*2)
Device-initiated interface power state Transitions 03h (*3)
Guaranteed In-Order Data Delivery 04h (*1)
Asynchronous Notification 05h (*1)
Software Settings Preservation 06h (*4)
*1 The device normally responds to the command but performs no
operation.
*2 This feature is disabled when power is on. While this function is
enabled, the device does not return the DMA Activate FIS for the first
data sector after the WRITE FP DMA QUEUED command is issued.
*3 This feature is disabled when power is on. While this function is
enabled, the device perform interface power save.
*4: This feature is enabled when power is on. While this function is enabled,
the device preserves the software settings across COMRESET.
*4) Automatic Acoustic Management (AAM)
The host writes to the Sector Count filed with the requested acoustic management
level and executes this command with subcommand code 42h, and then
Automatic Acoustic Management is enabled. The AAM level setting is preserved
by the drive across power on and COMRESET.
AAM Level Sector Count Filed
Performance mode (Fast Seek)
Acoustic mode (Slow Seek)
Abort
Non Operate
C0h-FEh
80h-BFh
01h-7Fh
00h, FFh
High-speed seek to which gives priority to the performance operates as for
"Performance mode", and low-speed seek by which the seek sound is suppressed
operates as for "Acoustic mode".
Setting the seek mode by this command is applied to the seek operation in all
command processing.
Cuprins
Extinde tot
Manuale conexe pentru Fujitsu a văzut MHV2100BH