Manual De Utilizare Epson Scaner Foto 1640Xl [3/21 Pagini]

Epson scaner foto 1640XL

Using Optional Equipment 35

Removing the Shipping Screws

To prevent damage during shipping, two shipping screws are attached to the

transparency unit to secure its lamp assembly. You must remove these screws before

using the transparency unit.

1. Turn the transparency unit so the glass side faces up.

2. Use a Phillips head (cross

head) screwdriver to remove

the shipping screws, as

shown at right.

3. Install the screws in the

storage holes.

Before transporting the scanner, remove the transparency unit, reinstall the shipping

screws, and turn the transportation lock on the side of the scanner to the locked

position. See “Transporting the Scanner” on page 55 for instructions.

Installing the Transparency Unit

Follow these steps to install the transparency unit on the scanner.

1. Make sure the scanner is turned off. Then unplug the power cable from the

scanner.

2. Remove the document cover by grasping the back of the document cover and

easing the cover up.

3. Make sure the document table is clean and dust free.

If either screw is left in a shipping hole (the outer holes) while using

the transparency unit, the unit may be damaged.

Storage holes

1640XL.book Page 35 Wednesday, November 19, 2003 8:46 PM